CONCEPT EDV-16X is Designed to Remove Condensate from Compressed Air Systems. Most Suitable for installation on Compressors After Coolers, Drip Legs, Moisture-separator etc. Valve has facility to Drain Manually on Power Failure.
Timer Specifications
- Interval Time: 1-128 Min. Adjustable
- Drain Time: 4 Sec. (Other on request)
- Supply Voltage: 230VAC (160-260), 50Hz (Other on request)
- Operating Temp.: 70°C (Maximum)
- Housing Material: High Impact Resistant ABS
- Connection: DIN 43650 A with Power Indication
Valve Specifications
- Type: 2 Way Direct Acting
- In/Out Ports: ¼” / ½” / ¾” / 1" BSP (F)
- Working Pressure: 16 Kg./cm²
- Valve Body: Bar Stock Aluminium with anodizing (Brass & S.S. on request)
- Orifice: 2.5 mm
Indications:
- LED (Red): Power On
- LED (Yellow): ‘On’ after every 15 sec. Indicates healthiness of the timer
- LED (Green): ‘On’ during drain cycle
Features:
- Fully Automatic
- No Maintenance
- Manual Test Switch
- Indication for Valve Healthiness
- Easy to Replace
- ‘O’ Ring seal on Cycle Adjustment pots to ensure weather-proof sealing
- Small Compact Resistant ABS Timer
| Model | Orifice | MWP | Connection Size | Application | Features | Remarks |
|---|
| EDV-162 | 2.5 mm | 16 Kg/cm² | 1” BSP (F) | Small Receivers, Moisture separator, Drip Legs | Poppet Type, Compact, Test Switch, Fault Indication, Inbuilt Strainer | Low cost, High Performance, Valve for Low Pressure applications. |
